National Specials

Completely Self Contained, Gas Powered Vacuum Recovery System

National Specials Request Catalog
Completely Self Contained, Gas Powered Vacuum Recovery System
  • RGV40H12

Description

Two new models now available in the Hydro Tek RGV Gas Vac product line.

The RGV Gas Vac is an engine powered, water recovery system with pump out.  It can be used with either one or two separate pickup devices and is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood.

The unique polyethylene separation tanks are non-corrosive, weigh significantly less than 50 gallon steel drums, and have access to the inside for periodic cleaning & maintenance with a quick lift-off lid.  Open the large 1½” valve to purge sludge/solids that settle at the bottom.  Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted, no heavy tipping to dump your tanks.

Features:

  • Completely self-contained Does not need a generator or 110v plug for the transfer pumps. Transfer pumps connect to an on-board 12v battery
  • Air throttle valve, on vacuum tanks, for precise control of air flow when using different pickup devices or varying hose lengths
  • Quick-plug connectors for transfer pumps & high water shutdown
  • Recovers up to 25gpm, use 350’ total hose length – Use with one or two pickup devices
  • Small footprint with fuel tank and battery box integrated into frame while keeping a small footprint
  • Lift-out strainer basket removes large debris before emptying into separation tank to protect transfer pump
  • Vacuum and pump out simultaneously and automatically, no loss of suction or lost time dumping tanks
  • Requires 2” diameter vacuum hose and 2” diameter discharge hose

Optional:  Solids/Sand separator tank (#ATP36)
Optional:  Modular filtration system (#RPF15E1)
Optional:   your choice of recovery surface cleaner, vacuum berms and accessories

 

Specifications

Model# RGV40H12: Honda GX630

Model# RGV40V12: Vanguard 627cc

Download Tek Sheet

Request Information

Video

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU