National Specials

Easy Start Valve on a pressure washer

Request Catalog
By
Comments Off on Easy Start Valve on a pressure washer
Hydro Tek News

Easy Start Valve on a pressure washer

Easy Start Valve Warning

Many pressure washer systems are outfitted with an “Easy Start” valve on the discharge head of the pump. A properly functioning valve serves to ease or reduce the internal pump pressure while cranking an engine to facilitate easier starting of the engine. The valve then  closes to allow full pressure once the engine reaches full RPM.

The condition of the Easy Start valve is an important safety factor to consider when diagnosing or servicing pressure switch burner control systems, as the burner circuit can inadvertently remain on if the Easy Start valve fails to fully close after engine startup.

Tests have shown that an Easy Start valve partially blocked open can function just like a nozzle, thus causing the pressure switch to engage and allow the burner to fire even when the gun is off. Such a condition is very dangerous and if a defective or blocked Easy Start valve is discovered it should be replaced or removed immediately.

Contact the Hydro Tek Technical Service Department for replacement parts or  more information  at (800) 274-9376

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU