National Specials

Learn How You Can Turn Your Pressure Washer into a Sludge, Slurry or Water Evacuation Tool

Request Catalog
By
Comments Off on Learn How You Can Turn Your Pressure Washer into a Sludge, Slurry or Water Evacuation Tool
Blogs

Learn How You Can Turn Your Pressure Washer into a Sludge, Slurry or Water Evacuation Tool

Learn How You Can Turn Your Pressure Washer into a Sludge, Slurry or Water Evacuation Tool

Your pressure washer, whether a hot water pressure or cold water pressure, offers you or your business so many options. However, certain water pressure accessories available from Hydro Tek can help you turn your pressure washer into an entirely different tool. A great example is our muck scupper and sludge pump. It can help turn your pressure washer into a highly effective water evacuation tool – and a lot more. Read on to learn more and then reach out to us at 800-274-9376 if you have additional questions.

How it works

If you want to turn your pressure washer into a water evacuation tool, a sludge evacuation tool, or a slurry evacuation tool then all you need is our muck scupper and sludge pump. It uses the pressure and energy from the spray of your regular pressure washer wand to create suction. That suction can pull the water – up to 87gpm – through a very heavy wall discharge hose. To put it simply: It harnesses the power of your pressure washer in an entirely new way.

You don’t need other tools to use this

One of the great things about this muck scupper from Hydro Tek is that all you need is your existing one-quarter inch pressure washer wand quick connect coupler. There are no other tools or parts required. We wanted to make this as simple as possible so that as many people as possible could use it. if you have questions, contact us and reference part numbers ANS04 and ANS55.

Our products are made from high-quality materials

This scupper is made from durable stainless steel. As a result, it’s not going to break, it’s not going to rust, and it will not corrode – even when you use it for heavy-duty, commercial and industrial use. It fights tightly into corners and can be used as a scraper to loosen stubborn muck. In fact, our unique design works perfectly at an angle. Compared to other sludge pumps, it can perform 45% better.

These stats are sure to impress you

Just how far up can you extract with this? Up to two stories vertically. The extraction rate is as high as 15 times your pressure washer’s flow rate. There’s often debris left in sump pits and / or troughs, like slurry or small pieces of gravel. You don’t have to worry about that with this accessory – they will flow easily out of the discharge hose. The standard discharge hose included is 15 feet but there are additional hose lengths available from Hydro Tek.

This product has a long list of applications

The list of ways in which this accessory can be used is almost endless. Use it for cleanup and recovery after a flood. Use it to clean out sump pits, troughs, and settling tanks at car washes. When you need to clean a small pool, foundation, or pond, use it to drain them. You can even use this accessory as an alternative to a sump pump. It can suck up chemicals, mud, paint, sludge it – you name it. contact Hydro Tek at 800-274-9376 to learn more.

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU