National Specials

Pressure Washer Use in Cold Weather

Request Catalog
By
Comments Off on Pressure Washer Use in Cold Weather
Hydro Tek News

Pressure Washer Use in Cold Weather

Physical Symptoms of Hypothermia

Many of us will need to work with power washers and equipment outdoors in the cold again this year. We may even run into some unexpected difficulties and need to be aware of the risks & warning signs of trouble. The following chart discusses the physical symptoms of hypothermia. It is provided to assist in showing the various stages of hypothermia that are readily apparent. It has no copyright and is to be used and distributed as you see fit. I hope that it will help in the recognition and prevention and treatment of hypothermia.

The chart is broken down into approximate body temperature and the symptoms that develop at those temps. The temps are in degrees f.

Temperature ----- Symptoms

98.6-95.0 °F

Intense shivering, ability to perform complex tasks is impaired, fatigue, poor coordination, immobile and fumbling hands.

95.0-91.4 °F

Violent shivering, difficulty speaking, sluggish in thinking, amnesia starts to appear, starts to lose contact with environment, stumbling gait, feeling of deep cold and numbness.

91.4-87.8°F

Shivering decreases, in it's place is muscle rigidity, erratic movement, thinking is not clear, victim can't still stand, hallucinations, loses contact with the surroundings.

87.8-85.2°F

Rigid muscles, no shivering, very irrational, starts into a stupor, pulse and respiration slow, pupils start to dilate, skin is turning bluish, drowsiness.

85.2-78.8°F

Does not respond to words that are spoken, pulse is very erratic, reflexes do not function, victim will be only semi-conscious, heart starts atrial fib.

BELOW 78.8°F

Heart and respiratory failure, ventricular fibrillation, probable brain and lung hemorrhage, apparent death.

Victims have been saved with core temps as low as 75.0°F. The best chances of recovery are from early diagnosis and treatment. Even though there may not be a pulse or breathing, the victim can be saved. Many times the cold will cause a reaction in the nervous system that can help the victim. The most important thing to remember is that it won't go away!!! The problem must be treated and treated quickly. This goes for others as well as for yourself. You should always be aware of what is happening to you as well as your partners. Be prepared to treat it before you cannot help yourself.

Post navigation

  • Hot Water Pressure Washers

    Hydro Tek hot water pressure washers are designed to tackle the toughest messes wherever they may occur. Our products feature high-quality stainless steel construction, simple controls, and an innovative Spiralast™ heating coil that improves efficiency and reduces your fuel costs. We manufacture the Spiralast™ coils right here in our facility using a proprietary cold rolled process and robotic welds for exceptional strength and unimpeded flow. Our Spiralast™ lifetime warranty is the ONLY lifetime heating coil warranty in the industry.

  • Advantages of a Hot Water Pressure Washer

    Simply by heating up the water, a hot water pressure washer delivers dramatically improved cleaning power compared to a cold water machine. Hot water pressure washers are especially useful for cleaning sticky, greasy, or oily surfaces, because they will loosen the dirt much faster without the large amounts of soap, detergent, or other cleaning chemicals that must be used with a cold water system.

  • Hot Water Pressure Washer Applications

    A hot water pressure washer is essential for any cleanup job involving a sticky, greasy, or oily mess, as well as for applications where a surface must be sanitized. With a variety of models available, including self-contained mobile units with gas, diesel, or electric power, Hydro Tek hot water pressure washers can go anywhere and clean anything. Some common applications include heavy equipment cleaning, vehicle cleaning, graffiti removal, restaurant hood vent cleaning, and livestock facility cleaning.

Quality & Innovation Since 1985

Hydro Tek

From simple beginnings in 1985, Hydro Tek has grown to become the most trusted name in the pressure washer manufacturing industry.

How did we do it? By continually focusing on quality and reliability as the key to customer satisfaction, and by incorporating the latest technologies into our design and manufacturing processes.

By 1991, we were using computer-aided drafting systems to refine our product designs and improve efficiency. In 1997, we brought the power of computers to the shop floor by incorporating laser-cutting and other CNC manufacturing machinery, and in 2001 we began focusing on improving efficiency through the latest manufacturing techniques. The end result has been superior products delivered at a superior value to our customers. Through the next decade, we look forward to fulfilling our vision of making our products the "obvious choice" for all your industrial and commercial cleaning needs.

MENU